Services / Industrial Coating Contractors
Industrial Coating Contractors
A single point to reach vetted industrial coating contractors nationwide. Tell us the service and metro and we route your request to a matched applicator — abrasive blasting, industrial painting, powder and floor coating.
Not sure which service you need?
What industrial coating contractors do
Industrial coating contractors — sometimes searched for as industrial coatings contractors, plural — protect steel and concrete assets from corrosion, wear, chemicals and fire. The work is an engineered system, not decoration: surface preparation to an SSPC standard, controlled application of the specified coating, and inspection of dry film thickness and coverage. Surface prep and QA — not the paint itself — determine how long a coating lasts.
Whether you call it an industrial coating contractor, an industrial coatings contractor, or simply a coatings contractor, the work and the standards it's held to are the same — this page and our request form cover all of them.
Entity note: SSPC and NACE (now merged as AMPP — the Association for Materials Protection and Performance) set the surface-prep and coating-inspection standards referenced below.
Services we cover
- Sandblasting & abrasive blasting — surface prep to SSPC grades.
- Industrial painting — high-performance protective systems.
- Powder coating — durable electrostatic finishing.
- Concrete & floor coating — epoxy/polyurethane industrial floors.
- Protective & corrosion coating — aggressive-environment systems.
Typical cost by service — the IG table
A single, side-by-side view of indicative installed cost across our core services — the kind of comparison generic cost sites don't publish in one place:
| Service | Indicative installed cost | Main cost driver |
|---|---|---|
| Sandblasting | $8 – $16 / sq ft | Prep grade (SP 6 vs SP 10), containment |
| Industrial painting | $4 – $12 / sq ft ($8–$15+ immersion) | Prep + coating system |
| Powder coating | $1.50 – $5 simple, $8 – $45 specialty | Part size, geometry, volume |
| Floor coating | $3 – $15 / sq ft | System (epoxy/PU), prep, thickness |
Indicative industrial-spec ranges, checked against our per-service cost guides — actual quotes depend on prep grade, access, coating system and volume. Residential and light-commercial work (garage floors, fence rails, small parts) runs well below these figures; see each service's cost guide for the residential-vs-industrial split.
Industries served
Refineries and petrochemical, water and wastewater treatment, manufacturing and food processing, marine and offshore, bridges and structural steel — each with its own exposure, standards and coating systems.
How to choose a contractor
- SSPC/AMPP experience with the surface-prep grade your spec requires.
- AMPP-certified inspectors (film thickness, holiday testing) on critical assets.
- Relevant project history in your industry and asset type.
- Insurance and safety record for confined-space and industrial work.
How our quote process works
Tell us the service, metro and asset; we route your request to a vetted contractor serving your area. No marketing runaround — just a quote, with a response within 24 hours.
Common questions
What do industrial coating contractors do?
How much do industrial coating contractors charge?
What certifications matter — SSPC/NACE?
How do I get multiple quotes?
What is anti corrosion coating?
Which is not an anti corrosion coating material?
Explore & research
Get matched for Industrial Coating Contractors
Tell us your metro and asset — we route your request to a vetted contractor.